HVLP Paint Sprayer

Title Default Title
Qty:
Powered by a 600W motor, this high volume, low pressure (HVLP) paint sprayer allows for all popular coatings to be sprayed including stains, lacquers, varnishes, enamels, primers, acrylics and creosote, although some may need to be thinned before use. A high volume of fluid is sprayed at a low pressure, causing up to 90% less overspray compared to a conventional spray system. The low pressure allows you to lay the paint on rather than blasting it on, resulting in a softer, easier application of the spray, meaning much more of the finish ends up on the desired surface. As less fluid is consumed, material costs are reduced and there is less impact on your workshop, garage or garden surroundings.

Designed for portability, the spray gun can be stowed upright in the motor casing when not in use. Comfortable to use for long periods this electric paint spray gun has a soft grip handle and an adjustable 2.5mm nozzle for vertical, horizontal and circular spray patterns. To check your coating is suitable prior to spraying, you simply pour 100ml of your coating into the supplied viscosity cup and time in seconds how long it takes to flow through. The instruction guide shows how long (known as DIN-s) each type of coating should take to flow through the cup, i.e. varnish 15 to 40 seconds. If within range you are good to spray, if not then you need to thin accordingly.

Operating at a flow rate of 1000ml per minute under a maximum spray pressure 0.3 of a bar this HVLP sprayer will allow the novice paint sprayer to achieve excellent results after a few practice sprays. Supplied with 2 metres of 230V power cable and plug, viscosity measuring cup, a cleaning needle and a 900ml spray gun with a 2.5mm nozzle. An excellent choice for woodworking projects, car restoration and general home and garden painting. ©